B1750 Valve Adjustments
bunnspecial
Join Date: Jan 2005 Posts: 22 New York |
2006-01-03 122214
I have a Kubota B1750HSD and I want to adjust the valve clearances. Does anyone know the gaps? Also looking from the front of the tractor which is the front valve in each group, intake or exhaust? Thanks!
Reply to | Quote Reply | Add Photo
B1750 Valve Adjustments
tarbaby
Join Date: Nov 2005 Posts: 12 harrison, Maine. |
2006-01-11 122617
You may need to check an engin manual for this your engin may have the valves timed or valve timing set befor you can check the gap...paul ....
Reply to | Quote Reply | Add Photo
B1750 Valve Adjustments
WillieH
Join Date: Feb 2003 Posts: 543 New England Pics |
2006-01-19 123029
bunnspecial -
Depending on which engine is in your B1750, your clearance values may differ a bit.
D850-5B.........0.145 to 0.185mm / 0.0057 to 0.0073 inches
D950-5B.........0.145 to 0.185mm / 0.0057 to 0.0073 inches
V1200-5B (4cyl).0.145 to 0.185mm / 0.0057 to 0.0073 inches
Unless someone has changed the engine, you should have the D950-5B 3cyl.
These are the factory specs for the respective engines used.
As far as the position of intake vs. exhaust, with your gear case on your left, and flywheel on your right, sequence is as follows from left to right:
3in,3ex,2in,2ex,1in,1ex
Hope this helps you out -
-Willie H ....
Reply to | Quote Reply | Add Photo
Go Top
Share This